CISCO 200-301 CCNA EXAM Questions

CISCO 200-301 CCNA EXAM Questions

The questions provided below are part of our premium content and are very useful for both practicing for the CCNA 200-301 Real Exam and getting an idea on how the premium content looks like.

We do out best to provide our users with as much content as possible and appreciate your support by using our products.

Please use the comment section to leave your thoughts and suggestions.

CCNA 200-301 PREMIUM QUESTIONS

50.00

PDF&VCE with 339 Questions and Answers
VCE Simulator Included
30 Days Free Updates | 24×7 Support | Verified by Experts

QUESTION 1
Refer to the exhibit.

Which type of route does R1 use to reach host 10.10.13.10/32?
A. default route
B. network route
C. host route
D. floating static route

QUESTION 2
Refer to the exhibit.

Which prefix does Router1 use to Host A?

A. 10.10.10.0/28
B. 10.10.13.0/25
C. 10.10.13.144/28
D. 10.10.13.208/29

QUESTION 3
A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented? (Choose two.)

A. input errors
B. frame
C. giants
D. CRC
E. runts

QUESTION 4
How do TCP and UDP differ in the way that they establish a connection between two endpoints?

A. TCP uses the three-way handshake, and UDP does not guarantee message delivery.
B. TCP uses synchronization packets, and UDP uses acknowledgement packets.
C. UDP provides reliable message transfer, and TCP is a connectionless protocol.
D. UDP uses SYN, SYN ACK, and FIN bits in the frame header while TCP uses SYN, SYN ACK, and ACK bits.

QUESTION 5
Which 802.11 frame type is association response?

A. management
B. protected frame
C. action
D. control

Reference: https://en.wikipedia.org/wiki/802.11_Frame_Types

QUESTION 6

In which way does a spine-and-leaf architecture allow for scalability in a network when additional access ports are required?

A. A spine switch and a leaf switch can be added with redundant connections between them.
B. A spine switch can be added with at least 40 GB uplinks.
C. A leaf switch can be added with connections to every spine switch.
D. A leaf switch can be added with a single connection to a core spine switch.  

QUESTION 7

Which statement identifies the functionality of virtual machines?

A. The hypervisor communicates on Layer 3 without the need for additional resources.
B. Each hypervisor can support a single virtual machine and a single software switch.
C. The hypervisor can virtual physical components including CPU, memory, and storage.
D. Virtualized servers run most efficiently when they are physically connected to a switch that is separate from the hypervisor.

QUESTION 8

Which command automatically generates an IPv6 address from a specified IPv6 prefix and MAC address of an interface?

A. ipv6 address dhcp
B. ipv6 address 2001:DB8:5:112::/64 eui-64
C. ipv6 address autoconfig
D. ipv6 address 2001:DB8:5:112::2/64 link-local

QUESTION 8

Which command automatically generates an IPv6 address from a specified IPv6 prefix and MAC address of an interface?

A. ipv6 address dhcp
B. ipv6 address 2001:DB8:5:112::/64 eui-64
C. ipv6 address autoconfig
D. ipv6 address 2001:DB8:5:112::2/64 link-local

QUESTION 9

When configuring IPv6 on an interface, which two IPv6 multicast groups are joined? (Choose two.)

A. 2000::/3
B. 2002::5
C. FC00::/7
D. FF02::1 E. FF02::2

Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/xe-3s/ipv6-xe-36s-book/ip6-multicast.html

QUESTION 10

What is the default behavior of a Layer 2 switch when a frame with an unknown destination MAC address is received?

A. The Layer 2 switch forwards the packet and adds the destination MAC address to its MAC address table.
B. The Layer 2 switch sends a copy of a packet to CPU for destination MAC address learning.
C. The Layer 2 switch floods packets to all ports except the receiving port in the given VLAN.
D. The Layer 2 switch drops the received frame.

14 comments

  1. Erin - Reply

    Premium Valid! 8xx from the getgo 🙂 my advise is to take your time and go over the questions multiple times, try to answer them not just memorize the answers. This way if you have new questions you will be able to answer them regardless.

  2. Anonymous - Reply

    Nice work, it helps a lot on understanding what is required from one on the exam. Kudos on the explanations, would be nice to have one for each question but the ones that are there are very well done. Studied the premium and besides all I mentioned the questions on the exam were 1 on 1 with the ones provided here… nothing more to add GJ!

  3. Anonymous - Reply

    Really happy that I found this place before my exam 🙂 I would have failed for sure and not because I haven’t studied… trick questions are the worse who the hell gives ambiguous instructions in real life and hopes everything will be understood. Anyway frustration besides the questions on the exam are the as the ones in the premium Q&A here.

Leave Comment

Your email address will not be published.